How do I update CLEARLINE firmware?

 

1.    Insert the ElectroSea USB memory drive.

2.    Go to the Update menu. Line 1 displays the current firmware version of the unit. Line 2 displays the available firmware version that is on the USB memory drive. It is possible to upgrade or downgrade the firmware version.

3.    Press and hold the Up & Down keys simultaneously for 10 seconds, then release the keys once the update begins.

4.    During the update, the Control Unit is in a locked mode and cannot be used. The bottom line of the display will show the update progress.

5.    Once the update is complete, the Control Unit will reboot.

6.    Confirm the update was successful by going back to the Update menu. The display will show that the FW X.X is up to date.

 

undefined

NOTE: In the event that the firmware update fails, the unit maintains a redundant copy of the existing firmware. The screen will display a result message at the end of an update attempt to confirm the update was successful. Repeat the steps above to retry the firmware update if required.