What is the Flow Alert?
The Flow Alert feature monitors seawater flow through the ClearCell. This feature allows the user to set a minimum flow rate threshold value and time duration. If the seawater flow rate drops below a minimum value for a period of time, then “Flow Alert” will appear on the display (no audible alert). This feature notifies the user that some part of the seawater circuit such as the intake, strainer, pump, or internal screen on the ClearCell requires cleaning or is not functioning properly. Flow rate can be set in GPM or LPM, and time duration in minutes.
If a Flow Alert occurs:
1. Check vessel’s strainers and intake grates for blockage
2. Check seawater pump operation
3. Check ClearCell Internal Screen
To set the Flow Alert value go to MENU, Flow Alert, and enter desired threshold flow rate and time duration for notification.
NOTICE: Flow Alert feature is default OFF from ElectroSea and must be set-up by the installer or end user.
NOTICE: CLEARLINE will continue generating chlorine even after a Flow Alert occurs. Flow Alert does not prevent CLEARLINE from operating.
Related Articles: Maintenance: Cleaning Internal Screen